Victron Smart Solar Charge Controller has built in Bluetooth
allowing you to connect to your smartphone via the Victron Connect app. This enables you to setup and configure your controller and gives you a readout of voltages current and yield including 30 days historic data.
The Smart MPPTcontrollers Bluetooth can also be used to connect the device to a BMV 712 battery monitor Smart Shunt and/or Smart Battery Sense to communicate battery temperature and voltage. BR>
Ultra fast Maximum Power Point Tracking (MPPT)
When there iscloudy skys with thelight intensity changing continuously an ultra fast MPPT controller will improve energy harvest by up to 30% compared to standard PWM charge controllers and by up to 10% compared to slower MPPT controllers Advanced Maximum Power Point Detection in case of partial shading conditions
If partial shading occurs two or more maximum power points (MPP) may be present on the power- voltage curve. Conventional MPPTs tend to lock to a local MPP which may not be the optimum MPP. The innovative SmartSolar algorithm will always maximize energy harvest by locking to the optimum MPP. Flexible charge algorithm
Fully programmable charge algorithm and eight pre-programmed algorithms. Extensive electronic protection
Over-temperature protection and power derating when temperature is high. PV short circuit and PV reverse polarity protection. PV reverse current protection. Internal temperature sensor and optional external battery voltage and temperature sensing via Bluetooth
A Smart Battery Sense or a BMV-712 Smart Battery Monitor can be used to communicate battery voltage and temperature to one or more SmartSolar Charge Controllers. Fully discharged battery recovery function
Will initiate charging even if the battery has been discharged to zero volts. Will reconnect to a fully discharged Li-ion battery with integrated disconnect function. VE.Can: the multiple controller solution
Up to 25 units can be synchronised with VE.Can
Ultra fast Maximum Power Point Tracking (MPPT)
BatteryLife: intelligent battery management
Optional LCD display
Resin encapsulated electronics
Battery voltage 12/24/36/48V
Maximum Efficiency exceeds 99%
Maximum Charge Current - 100 Amps
Maximum PVPanels 1450W-12V /2900W-24V / 5800 -48V
MaximumPV open circuit voltage - 250V
Fully programmable charge algorithm
Parallel synchronised operation with up to 25 units
MC4 Connectors;
Dimensions216 x295 x 103 mm
4.5kg weight
5 Year Warranty
TOP
